Honda TRX 400EX INSTALLATION And REMOVAL INSTRUCTIONS
download Quiet cores are supplied with this kit but not installed. To install the quiet cores remove both rear end caps ((turn downs) and install the quiet cores with the tubes facing inward....
View ArticleTriumph Bonneville America And Speedmaster The Freak Installation...
download INSTALLATION In order to install The Freak, the factory air-box must be removed. Because of it’s design, the factory air-box is not an item that is easily removed. There are several parts that...
View Article2002-2007 HONDA VFR 800 WITH ABS GALFER BRAKE LINE KIT INSTALLATION MANUAL
download Prep the motorcycle for this job A. Park motorcycle on the center stand in a well-lit shop (Fig.A) B. Note: it is not absolutely necessary to remove the fuel tank and body panels. However,...
View ArticleHonda Foreman 500 And Honda Rubicon WINCH MOUNTING KIT INSTALLATION
download Begin by removing the front skid plate located on the front of the ATV. Remove the four side 8mm bolts and four bottom 6mm bolts securing the front skid plate, figure 1. Save the fasteners as...
View ArticleHONDA 2005 CBR 600 RR FULL S/S EXHAUST HEADER INSTALLATION
download Place the motorcycle in a vise or on it’s kick stand and make sure it is safe and secure. NOTE: If reusing the stock midpipe and muffler, skip ahead to step #5. 2) Remove the rider and...
View ArticleHONDA 420 RANCHER 2×4/4×4 2007-2009 CLUTCH KIT INSTRUCTIONS
download Remove key from the ignition switch. Remove the side panels from both sides. Remove both foot wells. 2. Drain coolant. Remove the oil drain plug from the motor; if you carefully drain it into...
View ArticleHarley-Davidson Softail Conversion Kit Installation Instructions
download 1. Place the motorcycle on the lift. 2. Place a suitable Jack under the Frame of the Motorcycle and tie down securely. 3. Remove Drain Plug from Primary Cover Assembly and drain oil. 4. Slide...
View Article2009 – Current Harley Davidson Trike Conversion Kit INSTALLATION MANUAL
download 1. Place the motorcycle on the lift. 2. Place a suitable Jack under the Frame of the Motorcycle and tie down securely. 3. Remove Drain Plug from Primary Cover Assembly and drain oil. 4. Slide...
View Article1999-2008 FLHT Series Harley- Davidson Trike Conversion Kit Installation...
download 1. Place the motorcycle on the lift. 2. Place a suitable Jack under the Frame of the Motorcycle and tie down securely. 3. Remove Drain Plug from Primary Cover Assembly and drain oil. 4. Slide...
View ArticleGL1800 Goldwing Trike Conversion Kit Installation Instructions
download Disassembly of motorcycle: 1. Place the motorcycle on the center stand or lift. 2. Set the shock preload to zero. 3. Remove the four m8 x 1.25 SHCS from the passenger handles and remove seat....
View Article
More Pages to Explore .....